Search results for: 'sleev block for altern foot x2 f200'

Serving Sleeves, These are usually in a 1x7 configuration: 1 bundle of 7 strands. Cable used in ropes courses and zip lines is usually 7x19 or 6x24: Much more flexible Learn More

CMI Trolley Brake Block, The striking surface is crafted from ultra-high molecular weight polyethylene, noted for it's exceptional wear resistance. Steel hardware and a galvanized eye bolt round out the package Learn More

Rope climbing is made easier by the CMI Foot Ascender. The addition of this boot-mounted device maintains tension on the rope, allowing for easier advancement of the main ascender, and promotes better use of body mechanics by keeping your body in an upright position. Learn More

Kong Futura Foot Ascender, the Futura system (hand ascender, chest ascender and foot ascender) will be the most compact SRT hardware available on the market - but it will not be the cheapest! The Futura is here. A radical new approach to climbing ropes. Designed by top cavers for tight places in the most remote areas on earth (or under it). Surprisingly simple the new designs are comfortable to use thanks to the ergonomic grips. Learn More

FOOTAPE Adjustable webbing foot loop, Attaches to the ASCENSION handled rope clamp or the BASIC rope clamp for rope ascents Learn More

The Kong "Y" Rescue Lark's Foot is an asymmetric security loop in Y-shape of 13mm tape for self-securing canyoning. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

Our Galvanized Aircraft Zip Lining Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. Learn More

The strongest and smallest cordellete or chock cord available. Tech Cord's 5mm diameter and 5,000 lbs. tensile strength is achieved using a unidirectional Technora core and a bombproof polyester sheath. Learn More

The Rope Ladder provides moderately challenging access to high elements or an alternative to staple climbs. Constructed of double lashed hardwood dowels with waxed nylon cord to increase durability. Professional installation required.

 

Cost is by: LINEAR FOOT 

Learn More

The 1/4, 5/16, and 3/8 Swaging Tools are designed for crimping copper and aluminum oval sleeves and stop sleeves on zip lines, life lines,ropes course elements. Learn More

Catch for PANTIN foot ascender, helps to keep the rope in the device during rope ascents. It is available for PANTIN in right- and left-foot versions. Learn More

The adjustable FOOTCORD foot loop is used with an ASCENSION or BASIC rope clamp for rope ascents. Its 100 % Dyneema® construction increases durability. Learn More

Petzl Bermude Rescue Triangle is designed for the rapid evacuation of victims. The Bermude is very easy to put onto a person, even in a sitting position. With its alternative attachment points, it easily adapts to all body sizes from children to adults. Learn More

The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More

The handy alternative for shorter drops or lighter loads. To reduce weight, the rack is drawn from 5/16" stainless steel, and the solid bars are formed from anodized aluminum. Learn More

Petzl Pantin Ascender, A big advantage for long rope ascents. With the Pantin Ascender supporting the foot, the body is held in a more upright position thus making the ascent faster and less tiring for the arms. Learn More

The Kong KKR Via Ferrata set comes complete with carabiners, and is simply attached to the harness using a lark's foot Learn More

Nylon Shock Cord consists of a stranded rubber core covered with braided fiber resulting in an elastic cord with consistent stretch and strength. The durable "bungee type" cord is covered with nylon. Learn More

Yates Big Wall Ladder, Big Wall Ladders offer the simplicity of traditional 1" Etriers with the comfort of 2" Wall Etries. Built in spreader bar insures that steps remain open without causing foot pinching. Learn More

Just Perfect Pole Steps : JP Step II

 

The JP Step I and JP Step II  are Pole/Tree steps and fall protection anchor in one (think integrated LEAD anchor). Installs with 5/8" x 6" lag in poles and 5/8" x 8" lag in trees for the JP I and II. The JP R uses a Specialty 4" Lag Bolt and plate that comes with it. Supports over 5,000 lbs when properly installed. A great alternative to traditional pole steps and staples.  These pole/tree steps are easily installed (about one minute). They also provide great positive climbing aids for hands, feet, and safety anchors. JP Steps for trees and poles are the best looking and safest integrated step - fall protection anchor for ropes courses, challenge courses, and zip line access.

Learn More

The Kong X-Large Carabiner is ideal for big wall and belay stations where rope management is vital. The X-Large has a large amount of clearance, leaving you plenty of room for daisy chains and ropes. Learn More

Petzl Am'D Carabiner - Add security to your climbing anchors with the Petzl Am'D Traict Locking Carabiner. Take your pick of Petzl's Screw-Lock, Ball-Lock, or Triact-Lock gate to perfectly match your preference. The Am'D Carabiner also has a snag-free keylock gate to assure it never snags on gear when you're building a solid anchor at the top of the pitch you just climbed. Learn More

Petzl Paw Rigging Plate, Coming in three sizes for different set ups the PAW provides strong and lightweight organization for your rope set up. Learn More

3D-Vent women’s harness. Our fully-adjustable Solaris women’s harness features EDELRID 3D-Vent Technology and is specially designed to fit the female anatomy. Learn More

The quality of this carabiner is second to none! It is smooth, easy to handle, won't jam, and the price is right. Learn More

Thanks to its compact shape and SCREW-LOCK locking system, the ATTACHE is designed for multiple uses related to belaying: connecting a belay system to a harness, belaying with a Munter hitch... Learn More

A very comfortable all-round harness with 3D-Vent Technology and adjustable leg loops for sport climbing and mountaineering. Learn More

CMI "Beast" Tour Trolley Pulley, Designed for the fast lane of zip line tours, this trolley features a front bumper, reinforced 'crimped' side bars and forward facing design with drop down handles. Learn More

A unique full body harness with jointed padding for the children up to 40 kg. Learn More

Rock Exotica Swivel Ropes Course Zip Line Carabiners , The SwivaBiner features a high-strength bushing that will withstand greater abuse than a bearing. The SwivaBiner is designed to re-orient a load, and not provide high-speed rotation. Learn More

Probably the most comfortable harness money can buy, with 3D-Vent Technology for unparalleled wear comfort. Whether sport routes or longer alpine climbs, the Cyrus is suitable for all conditions. Learn More

Comfortable alpine harness with adjustable leg loops and laminated harness construction. Learn More

Our HyperBars, a solid anodized aluminum bar with a single lock-off pin, allow for easier and safer lock offs. The HyperRack includes a single HyperBar. Learn More